NUVEX CARE AND MAINTENANCE

This page is designed to provide architects, builders and end users wit the information required for the care and maintenance of the NUVEX^® product.

Retain the “New NUVEX^®” look for decades.

NUVEX^® partitioning systems are closer to being totally maintenance free than any other toilet partition on the market today. However, like any other product that is exposed to high traffic and other environmental conditions it will become soiled over time.

Cleaning and Graffiti Removal
NUVEX^® partitions can be satisfactorily cleaned using a garden hose and plain water. For more stubborn soiling we recommend the following:

a. ½ cup of household detergent and 2/3 cup of trisodium phosphate to 4 litres of water.
b. Any non-abrasive industrial strength cleaner.
c. For residual adhesive from the masking use mineral spirits or acetone. Take care not to allow these chemical to come into contact with the hardware.
d. For graffiti, it may sometimes be necessary to use a proprietary graffiti removal spray. Goof Off^®, Muckoff^® and Eco Concepts^® Graffiti and Stain Remover. All products are available from good hardware stores.

Cuts and Scratches
• Repair cuts and scratches by burnishing the surface with a smooth round object, such as a spoon or screwdriver handle
• Using a smooth round object, apply pressure to the cut or scratched surface and burnish with a blow dryer or heat gun, against the cut or scratch

Note:
To give your NUVEX^® panels a new like bright and glossy finish spray the surface with a silicone spray.